Vessel Gallery

Some vessels(bowls & hollowforms) I have made. 

(see bottom of page for ordering similar items)

NOTE:Some of the Thumbnails will switch to a different view when you hold the mouse over them and then switch to a third view when you remove the mouse.  Clicking on the thumb nail will enlarge only the first view.

 




Ant Pool II

Walnut/Acrylic HF
Charity Donation
Blackant Sculpted Black Walnut
w/Poly Resin Fill - H
= 8.5", D=  7.0"

Turned Box

An Amazingly Spalted Maple Box
Clear Maple Lid- H = 3-1/2", Width =  3-7/8"

Bitternut Potpourri HF

A Nicely Figured Bitternut Potpourri Vessel
Cherry Blossom Pewter- H = 3-7/8", Width =  4"
Honey Locust Potpourri HF
SOLD
     Highly Grained Honey Locust Potpourii HF
Flower Basket Pewter - H= 5-3/8", W= 4-7/8"




Custom Turnings

Flame Box Elder Plate & Saucer
H
= 1", D =  8.0"

Custom Turnings

The Ant Pool
SOLD
Blackant Sculpted Black Walnut
w/Poly Resin Fill - H
= 8.58", D=  4.0"




Custom Turnings

A Very Spalted Maple Hollow Form - Height = 8", Width =  8.5"

Custom Turnings

Walnut Burl NE Vase
Charity Donation
A Natural Edge Lidded Chalace - H
= 11-7/8",
D=  4.5"




Black-Black Walnut Bowl

Very Black Bowl
Charity Donation
A Very Black Black-Walnut Bowl - Height = 3", Width =  5.5"

Red Cedar Bowl wPlate

Plum Hollow Form
SOLD
     Plumwood HF w/Black Walnut Finial - Height= 5-3/8", Width = 4-7/8", Opening = 1.25"



Walnut Burl Bowl

Walnut Burl NE Bowl
Charity Donation
Natural Edge Black Walnut Burl Bowl - Height = 4-7/8", Width =  6"

Red Cedar Bowl wPlate

Cedar Cup & Saucer
SOLD
      Eastern Red Cedar Cup & Saucer - Height= 2.75", Width = 6.25", Opening = 3"



Red Cedar Vase

Aromatic Eastern Red Cedar Vase - Height = 4-7/8", Width =  2-7/8", Opening = 1-1/8"

Olive Wood Vase

Olive Vase
Charity Donation
      Higly Figured Olive Wood Vase - Height= 5-5/8", Width = 4-1/4", Opening = 2"



Spalted BoxElder Bowl

BoxElder Bowl
Not For Sale
Spalted/Wormy BoxElder Wood Bowl Width of bowl 6-5/8" Depth of bowl 2.0"

Custom Turnings

Simple Infinity
Charity Donation
      Higly Figured Maple Bowl 7.5" wide x 1.5" deep



Custom Turnings

Aladdens Other Lamp
SOLD
Spalted Maple Hollow Form w/Walnut Finial and  Simi Gloss Finish.  8.75 inches tall to the tip of the finial.

Figured Maple Chalice

"Stubby" Chalice
Not For Sale
      Highly Figured Maple With Matte Finish About 4" tall



Spalted Maple Hollow Form - NE1

Birds Mouth
SOLD
Spalted Maple Natrual Edge Hollow Form w/ Simi Gloss Finish.  6" across x 4.5" tall.

Eastern Read Cedar Bowl

Sails
SOLD
      Eastern Red Aromatic Cedar w/ Semi-Gloss Finish.  About 3" Tall



Figured Maple Hollow Form - Aladden

Two Story
SOLD
Spalted Maple Hollow Form w/Simi Gloss Finish.  4" tall and 5.75" across the top.

Figured Maple Chalice

Cherry NE Bowl
Charity Donation
      Cherry Natrual Edge Bowl w/Matte Oil Finish 6-1/2" wide x 3-3/8" deep



Spalted Maple Hollow Form - MiniVase

MiniVase
Not For Sale
Spalted Maple Hollow Form - Mini Vase
 
3-1/8" tall and 2.0" across the midsection.

Walnut&Maple HF -Space Needle

Space Needle
Charity Donation
      Walnut & Curly Maple Box 6" wide x 2-1/4" deep (8" to tip of finial)


 

Spalted Maple Hollow Form - MiniVase

Wings
Charity Donation
Figured Maple Bowl With Wings
 
OD at tip of wings 10" - ID of bowl 7.5" Depth of bowl 1.5"

Walnut&Maple HF -Space Needle

Change Tray
Gifted
      Walnut with brass inlay in outside edge.  5.5" wide x 1.5" deep



Custom Turnings

Apple Bowl
Charity Donation
      Spalted/Wormy BoxElder Wood Bowl Width of bowl 7.5" Depth of bowl 2.5"

 




  This is a sampling of vessels, bowls, and hollow-forms I have made.  My largest turnings will not exceed 6-8 inches in diameter due to the capacity of my small lathe (which I plan on remedying in the near future).  I do not carry much of an inventory so what you see here may have already been gifted, sold or donated for charity.  However, if you see something you like I can make a similar one keeping in mind of course that no two pieces of wood are identical.  Or I can make a custom turning to your specifications.  Contact me and let me know what you would like and I will do my best to meet your custom turning needs.  If any show "Available" contact me for pricing.

When I note the material the turning is made from I will try to provide a link to a website that provides more descriptive information about the material.  For instance if you click on the "Rosewood" or "Burl" name in the first available pen you will be taken to a website that describes the wood in detail.

Sorry but I do not accept orders from outside of the USA. There is just too much red tape.

An online store may be offered in the future but until then please contact JD directly if you want to order any custom wood product.

Check me out on My Facebook page or my J&J WoodSmith Facebook page, I post pics of my work on those as well.


 

Contributing Member of:

Sawmill Creek Woodworkers Forums
Logo

International Association of Pen Turners
 Logo